Multi-DisplayMT series

MT-200

Touch Panel Display

[Discontinued model]

This model has been discontinued.

Recommended Replaceable Products
To contact us:

SPECIFICATIONS

Select Language

Model

MT-200

Type

Dot matrix LCD panel (full graphic type)

General specifications

Rating

Power voltage

24 VDC +10%, -5%

Current consumption

0.4A or less

Environmentalresistance

Operating ambient temperature

+10 to 40°C

Operating ambient humidity

35 to 85%RH (no condensation)

Noise resistance

1,000 Vp-p, 1 µs (power supply noise)

I/O unit specifications

BUSY output

Output

NPN open collector

Rated load

30 mA maximum (24 VDC or less)

Alarm output

Output

NPN open collector

Rated load

0.3 A maximum (24 VDC or less)

Parallel Interface

Data input Page strobe input Address strobe input Data strobe input Function strobe input Area strobe input Data digit specification Count/reset input

Input rating

24 VDC

Minimum ON voltage

19V

Maximum OFF current

2mA

Minimum input pulse width

35ms

Serial I/O

Applied standard

Conforms to EIA RS232C (excluding the connector shape)

Synchronisation between the transmitter and receiver

Start-stop (full duplex)

Transmission code

ASCII

Data bit length

8 bits

Stop bit length

1 bit, 2 bits (switchable)

Parity check

Even, odd, none (switchable)

Baud rate

1,200, 2,400, 4,800, 9,600 bps (switchable)

Display panel specifications

LCD display panel

Effective display area

127.16x33.88mm

Number of dots

240 × 64 dots

Dot size

0.49x0.49mm

Dot pitch

0.53mm

LCD life span

50,000 hours

Backlightlamp

CFL (cold cathode tube), 10,000-hour life minimum (20,000 hours on average),*1 (25°C)

Display characters

x1/4

8 x 8 dots

212 characters (alphanumeric, katakana, symbols)

Half-width

8 x 16 dots

Full-width

16 x 16 dots

2,965 characters (kanji (JIS standard 1)), 524 characters (alphanumeric, hiragana, katakana, Greek characters, Russian characters, symbols), 381 characters (special symbols), 16 characters (custom*1

x2, vertical

16 x 32 dots

x4

32 x 32 dots

x9

48 x 48 dots

x16

64 x 64 dots

Internal registration screen

Main unit built-in SRAM

Main unit built-in SRAM:*2 120 screens (1 file)

External registration screen

Memory card SRAM (128 kB)

Memory card SRAM:*2 224 screens (6 files)

Display function

All character sizes can be used on a single screen, blinking display, inverted display, backlight on or off, key paging, auto paging, overlap display, numeric value data insertion

*1 Custom characters can only be registered from a PC.
*2 The lithium battery is used to back up memory. (5-year life when stored between 10 and 40°C)

Downloads:

For visitors who viewed this page

    Downloads

    • PLC/HMI 用户支持

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Controls