High-definition Touch Panel Display VT2 series

VT2-E1

Ethernet Unit (Both for VT3 and VT2)

SPECIFICATIONS

Select Language

Model

VT2-E1

General specifications

Current consumption

200mA or less

Power voltage

5 VDC ±5%

Noise resistance

1,500 Vp-p, pulse width : 1 µs (common mode, by way of a noise simulator)

Withstand voltage

1500 VAC 1 minute (between power terminal and housing)

Insulation resistance

5 MΩ or more, tested with a 500 VDC megger (between the power supply terminal and the case)

Vibration resistance

Intermittent vibration

Frequency: 5 to 9 Hz

Half amplitude: 3.5 mm*1

Frequency: 9 to 150 Hz

Acceleration: 9.8 m/s2*1

Continuous vibration

Frequency: 5 to 9 Hz

Half amplitude: 1.75 mm*1

Frequency: 9 to 150 Hz

Acceleration: 4.9 m/s2 *1

Operating environment

Minimal amount of dust and corrosive gas present

Ambient operating temperature

0 to +50°C

Ambient operating humidity

35 to 85%RH (No condensation)*2

Ambient storage temperature

-10 to +60°C (No freezing)

Ambient storage humidity

35 to 85%RH (No condensation)*2

Weight

Approx 135g

Performance specifications

Printer output

Colour printer

ESC/P raster 2

Epson Sales Japan Corporation PM-930C/940C/870C and PM-3700C/4000PX

ESC/P raster

Epson Sales Japan Corporation PM-950C/890C/840C/830C/740C/730C and PM-3500C/2200C

LIPS IV raster

Colour and monochrome laser printers that support the Canon LIPS IV printer driver

Thermal printer

Citizen Systems CBM-293 and CT-P293

Printers that support PictBridge

PictBridge

Ethernet

Compliance

IEEE802.3

Transmission speed

10 Mbps (10BASE-T),100 Mbps (100BASE-TX)

Transmission medium

STP or category 3 or higher UTP (10BASE-T), STP or category 5 or higher UTP (100BASE-TX)*3

Maximum cable length

100 m

Maximum number of connectable hubs

4 (10BASE-T),2 (100BASE-TX)

Maximum number of connections

PC application:*4 3,
FTP: 4

*1 Conforms to JIS B 3502, IEC61131-2
Number of sweeps: 10 times respectively in the X, Y, and Z directions (100 minutes)
*2 When the ambient temperature is higher than 40°C, please use it in the condition of an absolute humidity of 85%RH at 40°C.
*3 STP = shielded twisted pair cable, UTP = unshielded twisted pair cable
*4 PC application refers to VT STUDIO and DATA BUILDER.

For visitors who viewed this page

    • PLC/HMI 用户支持

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Controls