High-Accuracy Digital Contact Sensor

GT2 series

Catalogues View Catalogue

Extension Board for GT2-100P GT2-E3P

GT2-E3P - Extension Board for GT2-100P

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

Software

  • CE Marking

Specifications

Model

GT2-E3P

Mounting type

Installed into GT2-100N/100P (up to 3 boards)

Output

PNP output

Main unit/Expansion unit

-

Power supply voltage

Supplied from the GT2-100N/100P

Power consumption

Normal

4,200 mW max. (30 V, 140 mA max.)*1

Power saving (Eco)

4,000 mW max. (30 V, 133.3 mA max.)

Display power

Measured value display

-

Other displays

Display range

Display resolution

Control input

Timing/preset/
reset/bank input

No-voltage input

Control output

HH/HI/GO/LO/LL

PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less

Response time

hsp(3)/5/10/100/500/1,000 ms
(When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)

Environmental resistance

Ambient temperature

-10 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET

Power supply / I/O cable

I/O: 30-pin connector (MIL standard)

Weight

Approx. 80 g

*1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode.
*2 When 2 or more sensor heads are connected, 20 mA or less.

Data Sheet (PDF) Other Models