Recent Searches
    Series ()
      Models ()
        Keywords

          Touch Panel DisplayVT3 series

          VT3-E3

          Ethernet Unit (for VT3)

          SPECIFICATIONS

          Select Language

          Model

          VT3-E3

          General specifications

          Current consumption

          200mA or less

          Power voltage

          5 VDC ±5%

          Noise resistance

          1,500 Vp-p, pulse width: 1 µs (common mode, by way of a noise simulator)

          Withstand voltage

          1500 VAC 1 minute (between power terminal and housing)

          Insulation resistance

          5 MΩ or more, tested with a 500 VDC megger (between the power supply terminal and the case)

          Vibration resistance

          Intermittent vibration

          Frequency: 5 to 9 Hz

          Half amplitude:3.5 mm*1

          Frequency: 9 to 150 Hz

          Acceleration: 9.8 m/s2*1

          Continuous vibration

          Frequency: 5 to 9 Hz

          Half amplitude:1.75 mm*1

          Frequency: 9 to 150 Hz

          Acceleration: 4.9 m/s2 *1

          Operating environment

          Minimal amount of dust and corrosive gas present

          Ambient operating temperature

          0 to +50°C

          Ambient operating humidity

          35 to 85%RH (No condensation)*2

          Ambient storage temperature

          -10 to +60°C (No freezing)

          Ambient storage humidity

          35 to 85%RH (No condensation)*2

          Weight

          Approx 130 g

          Performance specifications

          Printer output

          Colour printer

          ESC/P raster 2

          ESC/P raster

          LIPS IV raster

          Thermal printer

          Printers that support PictBridge

          PictBridge

          Ethernet

          Compliance

          IEEE802.3

          Transmission speed

          10 Mbps (10BASE-T),100 Mbps (100BASE-TX)

          Transmission medium

          STP or category 3 or higher UTP (10BASE-T), STP or category 5 or higher UTP (100BASE-TX)*3

          Maximum cable length

          100 m

          Maximum number of connectable hubs

          4 (10BASE-T),2 (100BASE-TX)

          Maximum number of connections

          PC application:*4 3,
          FTP: 4

          *1 Conforms to JIS B 3502, IEC61131-2
          Number of sweeps: 10 times respectively in the X, Y, and Z directions (100 minutes)
          *2 When the ambient temperature is higher than 40°C, please use it in the condition of an absolute humidity of 85%RH at 40°C.
          *3 STP = shielded twisted pair cable, UTP = unshielded twisted pair cable
          *4 PC application refers to VT STUDIO and DATA BUILDER.

          • PLC/HMI User Support
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Controls