Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          LCD Display Electronic Preset CounterRC series

          RC2-23

          72-mm□ 6-digit 7-segment LED, One-stage Preset, AC Power Supply, Round Hole Mounting

          [Discontinued model]

          This model has been discontinued.

          Recommended Replaceable Products
          To contact us:

          SPECIFICATIONS

          Select Language

          Model

          RC2-23

          Operation method

          Addition, subtraction

          Operation mode

          Overcount, auto reset

          Return method

          Manual reset, external reset, automatic reset (in auto reset mode)

          Display power

          7-segment LED (character height: 15 mm)

          Number of digits

          6-digit display, -99,999 to 999,999*1

          Prescale function

          A

          B

          Power off memory time

          Approx 10 years (at 20°C)

          Mounting method

          Panel mount (embedding), stand mount (optional)

          Input

          System

          External calibration input signal

          Signal

          Highest counting speed

          With contacts: 30 Hz, without contacts: 5 kHz (1:1 ON:OFF ratio)

          Input signal

          Non-voltage input (contact or solid-state) (Count input, inhibit input, reset input)

          Output

          Control output

          Relay output: 1c, 250 VAC, 3 A or less (360 VA or less, resistive load)

          Control output

          One-shot output time

          0.01 s to 0.5 s (variable)

          Solid-state

          Relay output: 24 ms or less (when set to 30 Hz), 12 ms or less (when set to 5 kHz)

          DC output

          12 VDC ± 10%, 50 mA maximum

          Rating

          Power voltage

          100 to 240 VAC ±10 %, 50/60 Hz

          Power consumption

          11VA or less

          Environmental resistance

          Insulation resistance

          100 MΩ or more (tested with a 500 VDC megger) between all the external terminals and the case

          Noise resistance

          Square wave noise generated by a noise simulator, between the power supply terminals, 2 kV for 1 µs

          Environmental resistance

          Ambient temperature

          -10 to +50 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Withstand voltage

          1,000 VAC for 1 minute (between all the external terminals and the case)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          100 m/s2, 3 times in each of the X, Y, and Z directions

          Weight

          Approx. 240 g

          *1 Display uses the zero suppression method.

          Downloads:

          Downloads

          • PLC/HMI User Support
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Controls