Recent Searches
    Series ()
      Models ()
        Keywords

          Programmable ControllerKV-5000/3000 series

          KL-16BT

          16-point Screw Terminal Block, Transistor (Sink)

          SPECIFICATIONS

          Select Language

          Model

          KL-16BT

          General Specifications

          Power voltage

          10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable)

          Operating ambient temperature

          0 to 60°C

          Operating ambient humidity

          35 to 85%RH (no condensation)

          Withstand voltage

          500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

          Noise immunity

          Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator)

          Insulation resistance

          -

          Operating environment

          No corrosive gas present

          General specifications

          Disconnection error output load

          30 VDC, 0.1 A or less, residual voltage: 1 V or less

          Vibration resistance

          10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail

          Input specifications

          Insulation system

          -

          Input maximum rating

          Performance specifications

          Input voltage

          Minimum ON voltage

          Maximum OFF current

          Input specifications

          Maximum OFF voltage

          Performance specifications

          Input impedance

          Number of inputs/outputs

          16-terminal terminal block transistor output

          Output specifications

          Output

          NPN open collector

          Residual voltage (when output is ON)

          0.8V or less

          Leakage current (when output is OFF)

          100 µA or less

          transistor output

          Rated load voltage

          30 V DC and
          5 to 26.4 V DC (power source supplied across VC and C)

          Rated output current

          0.5 A/output (when 24 V or more is applied across VC and C), 0.15 A/output (when 12 V or more is applied across VC and C), 0.05 A/output (when 5 V or more is applied across VC and C)

          Common ground

          Written on the terminal wiring diagram of each unit

          ON delay time

          25 µs or less

          OFF delay time

          200 µs or less

          Insulation resistance

          20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

          Insulation system

          Photocoupler isolation

          relay output

          Rated voltage

          -

          Rated output current

          Common ground

          ON resistance

          ON delay time

          OFF delay time

          Insulation resistance

          Insulation system

          Performance specifications

          Internal current consumption

          90mA or less

          Weight

          approx 140g

          • PLC/HMI User Support
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Controls