Recent Searches
    Series ()
      Models ()
        Keywords

          General Purpose Digital Contact SensorGT series

          GT-71AP

          Amplifier Unit, DIN Rail Type, PNP

          SPECIFICATIONS

          Select Language

          Model

          GT-71AP

          Type

          Amplifier unit

          Output

          PNP output

          Mounting type

          DIN rail mount*1

          Main unit/Expansion unit

          Main unit*2

          Power consumption

          Normal

          At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less

          Power saving (Eco)

          At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less

          Display power

          Measured value display

          6-digit 7-segment LED (red)

          Other displays

          2-colour 13-level bar LED display (red, green), indicators (red, green)

          Display range

          -99.999 to 999.999

          Display resolution

          1 µm

          Sampling rate

          2,000 times/second

          Control input

          Timing/preset/bank input

          Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more
          Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more

          Response time

          hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s

          HIGH, GO, LOW output

          PNP Offenkollektor, max. 50 mA (40 V oder weniger), Restspannung: 1 V oder weniger, N.O./N.C. umschaltbar

          Major functions

          Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks),
          Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm

          Rating

          Power voltage

          12 to 24 VDC, Ripple (P-P) 10 % or less*3

          Environmental resistance

          Ambient temperature

          -10 to +55 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Material

          Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC

          Accessories

          Instruction manual

          Weight

          Approx. 110 g (including the power cable)

          *1 Be sure to mount the DIN rail mounting amplifier on a DIN rail (i.e. the unit should be mounted on the metal DIN plate itself). For additional amplifier unit installation, be sure to use the end unit (OP-26751).
          *2 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less.
          *3 If additional amplifier units are installed, the power supply voltage is 24 VDC.

          Measurement Library

          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors