Recent Searches
    Series ()
      Models ()
        Keywords

          Digital Fibre Optic SensorsFS-N series (FS-neo)

          FS-N10

          Fibre Amplifier, Zero-line Expansion Unit

          SPECIFICATIONS

          Select Language

          Model

          FS-N10

          Type

          0-line

          Main unit/Expansion unit

          Expansion
          unit
          (No output
          cable)

          Control output

          N/A*1

          Response time

          50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)

          Multiple connections to Expansion units

          Up to 16 units can be connected total (two output type is treated as two units)

          Light source

          Red, 4-element LED

          APC

          ON/OFF switchable (Factory setting: OFF)

          Number of interference prevention units

          0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA
          (When set to double, the number of interference-prevention units will be doubled.)

          Rating

          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Current Consumption

          Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*2
          Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*2
          Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)

          Environmental resistance

          Ambient light

          Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less

          Ambient temperature

          -20 to +55 °C (No freezing)*3

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material

          Both main unit and expansion unit housing material: Polycarbonate

          Weight

          Approx. 20 g

          *1 Counted as 1 output when connecting with the network unit NU Series.
          *2 Increases 100 mW (4.0 mA) for High Speed mode
          *3 One or two more units connected: -20 to +55 °C; 3 to 10 more units connected: -20 to +50 °C; 11 to 16 more units connected: -20 to +45 °C. When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

          Fibre Unit Finder

          • Fibre Unit Finder
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors