RGB Digital Fibreoptic Sensors
CZ series
Specs RGB Digital Fibreoptic Sensors CZ series
Sensor head: Reflective type/Waterproof reflective type
|
Model |
CZ-10 |
CZ-11 |
CZ-40 |
CZ-41 |
|||
|
Image |
|
|
|
|
|||
|
Type |
Reflective (Small size |
Reflective (Small size, side-view |
Reflective (Long detection distance) |
Reflective (Small beam spot) |
|||
|
Detecting area |
10 to 30 mm |
3 to 15 mm |
70 ±20 mm |
16 ±4 mm |
|||
|
Smallest spot diameter |
0.9 to 3.5 mm dia. |
0.9 to 1.5 mm dia. |
6 mm dia. |
1 mm dia. |
|||
|
Allowable bending radius |
R25 mm |
R15 mm |
|||||
|
Cable length |
2 m (free-cut) |
1 m (Fibre:free-cut) |
2 m (free-cut) |
||||
|
Environmental resistance |
Enclosure rating |
IP40 |
IP67 |
||||
|
Ambient temperature |
-40 to +70 °C (No freezing) |
||||||
|
Relative humidity |
35 to 85 % RH (No condensation) |
||||||
|
Material |
Fibre: Plastic (Polyethylene sheathed) |
||||||
|
Case material |
Lens case: Aluminium, Fibre case: Stainless steel |
Polyarylate |
|||||
|
Weight |
Approx. 5 g |
Approx. 13 g |
Approx. 27 g |
||||
Sensor head: Area spot type/Retro-reflective type
|
Model |
CZ-12 |
|||
|
Image |
|
|||
|
Type |
Area beam spot, reflective |
|||
|
Detecting area |
5 to 20 mm |
|||
|
Allowable bending radius |
R25 mm |
|||
|
Cable length |
2 m (free-cut) |
|||
|
Environmental resistance |
Ambient temperature |
-40 to +70 °C (No freezing) |
||
|
Relative humidity |
35 to 85 % RH (No condensation) |
|||
|
Material |
Fibre: Plastic (Polyethylene sheathed) |
|||
|
Case material |
Polysulfone |
|||
|
Weight |
Approx. 19 g |
|||
Amplifier unit
|
Model |
CZ-V1 |
|||
|
Image |
|
|||
|
Output |
NPN |
|||
|
Light source |
Red LED, Green LED, Blue LED |
|||
|
Response time |
300 µs/1 ms (switch-selectable) |
|||
|
Indicator lamp |
Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED, |
|||
|
Error indication |
Excess light intensity, insufficient light intensity, insufficient colour difference |
|||
|
Calibration method |
1-point/2-point calibration (switch-selectable) |
|||
|
Tolerance value adjustment |
Numerical value setting on digital display |
|||
|
Differentiation mode |
C mode/C + I mode/I mode (switch-selectable) |
|||
|
Timer function |
OFF-delay timer (40 ms)/Timer OFF (switch-selectable) |
|||
|
Output selection |
Match output: Turns on when target colour matches registered colour. |
|||
|
External synchronisation input |
Response speed: 500 µs max. |
|||
|
External calibration input |
Input response time: 20 ms min. |
|||
|
Registered colour selection |
8-bank selection (By external input or key operation), |
|||
|
Control output |
NPN:40 VDC max. (100 mA max.), Residual voltage: 1.0 V max. |
|||
|
Protection circuit |
Reverse-polarity protection (power supply), |
|||
|
Rating |
Power voltage |
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
||
|
Current consumption |
75 mA or less |
|||
|
Environmental resistance |
Ambient light |
Incandescent lamp: 5,000 lux max., Sunlight: 10,000 lux max. |
||
|
Ambient temperature |
-10 to +55 °C (No freezing)*1 |
|||
|
Relative humidity |
35 to 85 % RH (No condensation) |
|||
|
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
|||
|
Shock resistance |
500 m/s2, 3 times in each of the X, Y, and Z directions |
|||
|
Case material |
Polycarbonate |
|||
|
Weight |
Approx. 115 g (including 2-m cable) |
|||
|
*1 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended |
||||
