Recent Searches
    Series ()
      Models ()
        Keywords

          High-Accuracy Digital Contact SensorGT2 series

          GT2-P12

          Stylus type General-purpose Sensor head

          SPECIFICATIONS

          Select Language

          Model

          GT2-P12*1

          Detection system

          Scale Shot System II, absolute (no tracking errors) type

          Measuring range

          12 mm

          Resolution

          0.5 μm

          Indicated accuracy

          2 µm (p-p)*2

          Measuring force

          Downward mounting

          1.0 N*3

          Side mounting

          0.95 N*3

          Upward mounting

          0.9 N*3

          Sampling cycle

          4 ms

          Mechanical response

          10 Hz*2

          Operation indicator light

          2-colour LED (red, green)

          Environmental resistance

          Enclosure rating

          IP67G (JIS)*4, IP67 (IEC), NEMA Type 13*4

          Ambient temperature

          -10 to +55 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          1,000 m/s2 (IEC60068-2-27)

          Materials

          Main body

          Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle of GT2-PA12K/PA12: SUS430 (Fluorine coating)

          Dust boot

          NBR

          Contact

          SUS304, SUS440C*5

          Sensor head cable

          Optional (connect to relay connector)

          Weight

          Approx. 35 g (not including cable)*6

          *1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased.For details, contact your local sales office.
          *2 Value when the ambient temperature is 20 °C.
          *3 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.
          No dust boots are used with the GT2-PA12K/PA12.
          *4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable.
          *5 Contacts are available as options sold separately.
          *6 Including the relay connector.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors