1. Connection with the LJ-S Navigator

  1. Install the LJ-S Navigator/LJ-S Observer on the PC to be connected.

Execute the file downloaded from the KEYENCE support site (www.keyence.com/support_ljs8000_pc) and follow the on-screen instruction for installation.

Unzip the compressed file downloaded. Then, double-click setup.exe in the folder and follow the on-screen instruction for installation.

*The LJ-S Observer will also be installed together with the LJ-S Navigator.

  1. Check the IP address of the PC before connecting it with the head.

Checking the PC IP address

  1. Set communication according to the IP address of the PC to be connected.

Setting the IP address