This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Ethernet Unit (for VT3) - VT3-E3

Ethernet Unit (Pict Bridge Compatible) (Both for VT3 and VT2) VT2-E2

VT2-E2 - Ethernet Unit (Pict Bridge Compatible) (Both for VT3 and VT2)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Software

  • CE Marking
  • UL Listing(c/us)

Specifications

Model

VT2-E2

General specifications

Current consumption

400mA or less

Power voltage

5 VDC ±5%

Noise resistance

1,500 Vp-p, pulse width : 1 µs (common mode, by way of a noise simulator)

Withstand voltage

1500 VAC 1 minute (between power terminal and housing)

Insulation resistance

5 MΩ or more, tested with a 500 VDC megger (between the power supply terminal and the case)

Vibration resistance

Intermittent vibration

Frequency: 5 to 9 Hz

Half amplitude: 3.5 mm*1

Frequency: 9 to 150 Hz

Acceleration: 9.8 m/s2*1

Continuous vibration

Frequency: 5 to 9 Hz

Half amplitude: 1.75 mm*1

Frequency: 9 to 150 Hz

Acceleration: 4.9 m/s2 *1

Operating environment

Minimal amount of dust and corrosive gas present

Ambient operating temperature

0 to +50°C

Ambient operating humidity

35 to 85%RH (No condensation)*2

Ambient storage temperature

-10 to +60°C (No freezing)

Ambient storage humidity

35 to 85%RH (No condensation)*2

Weight

Approx 150 g

Performance specifications

Printer output

Colour printer

ESC/P raster 2

ESC/P raster

LIPS IV raster

Thermal printer

Printers that support PictBridge

PictBridge

Epson Sales Japan Corporation PM-A650/A700/A750/A850/A870/A890/A900/A950/PM-D600/D750/D770/D800/D1000 and Canon PIXUS 80i/455i/560i/860i/960i/990i/iP90/iP3100/iP8600

Ethernet

Compliance

IEEE802.3

Transmission speed

10 Mbps (10BASE-T),100 Mbps (100BASE-TX)

Transmission medium

STP or category 3 or higher UTP (10BASE-T), STP or category 5 or higher UTP (100BASE-TX)*3

Maximum cable length

100 m

Maximum number of connectable hubs

4 (10BASE-T),2 (100BASE-TX)

Maximum number of connections

PC application:*4 3,
FTP: 4

*1 Conforms to JIS B 3502, IEC61131-2
Number of sweeps: 10 times respectively in the X, Y, and Z directions (100 minutes)
*2 When the ambient temperature is higher than 40°C, please use it in the condition of an absolute humidity of 85%RH at 40°C.
*3 STP = shielded twisted pair cable, UTP = unshielded twisted pair cable
*4 PC application refers to VT STUDIO and DATA BUILDER.

Data Sheet (PDF) Other Models