Compact Switching Power Supply

MS2 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Output Current 4.5 A, 100 W MS-H100

MS-H100 - Output Current 4.5 A, 100 W

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		MS-H100
Input conditions	Input voltage	85 to 264 VAC (50/60 Hz), 120 to 340 VDC^*1
	Frequency	47 to 63 Hz, DC^*2
Inputconditions	Input current (100/200 VAC)	1.6/0.9A or less
	Power factor (100/200 VAC)	0.99, 0.95 (typ.) at maximum load
	Efficiency (100/200 VAC)	76 to 81% typ.
	Leakage current (100/200 VAC)	0.4/0.75mA or less
	Rush current (100/200 VAC)	18, 36 A or less (with a +25°C cold start)
Output characteristics	Rated voltage	24V
	Variable voltage range	4.5A
	Rated current
	Ripple/noise voltage	1% (p- p) or less
	Input fluctuation	0.4% or less
	Load fluctuation	0.7% or less
	Startup time	1300/700ms or less (AC100/200V)^*3
	Output holding time	20 ms min. (100 to 240 VAC)
Protection	Overcurrent protection	5.3 A or more
	Overvoltage protection	Present^*4
Display	Display power	2-digit 7-segment LED (character height: 10 mm)
	Power off memory time	Approx. 10 years (at 20°C)
	Display resolution	0.1A
Applicable standards	Safety standards	UL1950, UL1012, CSA C22.2 No.95095, EN60950, EN50178
	EMC standard	FCC Part 15 B Class A, EN55011 Class A
	Limits for harmonic current emissions	EN61000-3-2
Environmental resistance	Insulation resistance	100 MΩ min. (with 500 VDC megohmmeter) (across input and output terminals) (across input terminals and PE terminal)
	Ambient temperature	-10 to +55 °C (No freezing) (See "Output conditions".)
	Relative humidity	25 to 85 % RH (No condensation)
	Storage temperature	-20 to +70 °C (No freezing)
	Withstand voltage	3.0 kVAC, 50/60 Hz, 1 min (across input and output terminals) 2.0 kVAC, 50/60 Hz, 1min (across input terminals and PE terminal) 500 VAC, 50/60 Hz, 1min (across output terminals and PE terminal)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm or less, 2 hours in each of the X, Y, and Z directions (1 G when attached to a DIN rail)
	Shock resistance	300 m/s², 2 times for each direction of 3 axes
Weight		Approx. 560 g
^1 When applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^2 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz. ^3 Defined with a rated input voltage of 100 VAC or 200 VAC at 100% load. ^4 The H Series is a cutoff type. To return, turn OFF the input power supply and after leaving it off for 1 minute or more, plug in the input power supply again. The E/F Series is a Zener diode clamp type. It will not restart after the protection circuit operation.

Data Sheet (PDF) Other Models