Programmable Controller
KV-7000 series
32-point Screw Terminal Block, Transistor Output KV-RC32BT
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | KV-RC32BT | |||
General specifications | Vibration resistance | Intermittent vibration | Frequency:5 to 9Hz | Half amplitude: 3.5 mm*1 |
Frequency:9 to 150Hz | Acceleration: 9.8 m/s2*1 | |||
Continuous Vibration | Frequency:5 to 9Hz | Half amplitude: 1.75 mm*1 | ||
Frequency:9 to 150Hz | Acceleration: 4.9 m/s2*1 | |||
Current consumption | At 11.4 V: 150 mA or less, at 26.4 V: 70 mA or less | |||
Power voltage | Rated voltage: 12 to 24 VDC, supply voltage range: 11.4 to 26.4 VDC | |||
Operating ambient temperature | 0 to +60°C (no freezing) | |||
Operating ambient humidity | 10 to 95%RH(no condensation) | |||
Ambient temperature for storage | -20 to +75°C | |||
Approved standards | Overvoltage category | II | ||
Pollution degree | 2 | |||
Storage relative humidity | 10 to 95%RH(no condensation) | |||
Approved standards | CE marking | EMI: EN55011 Class A, EMS: EN61131-2, low voltage directive: EN61131-2*2 | ||
Operating environment | Minimal amount of dust and corrosive gas present | |||
Altitude | 2000m or less | |||
Approved standards | FCC | FCC Part15B class A | ||
UL | UL :UL508 | |||
ICES | ICES-003 Issue4 | |||
Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2) | |||
Withstand voltage | 1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case) | |||
Enclosure rating | IP2X | |||
Insulation resistance | 100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal) | |||
CC-Link specifications | Supported version: 1.10, number of occupied stations: 1, station type: remote I/O station | |||
Input specifications | 24 V mode | Input maximum rating | DC26.4V | |
Input voltage | DC24V approx 5.3mA | |||
Minimum ON voltage | 19V | |||
Minimum ON current | - | |||
Maximum OFF voltage | ||||
Maximum OFF current | 2.0mA | |||
Input impedance | 4.3 kΩ | |||
Insulation system | Photocoupler isolation | |||
Input time constant (switching method) | · 0.2 ms · 1.5 ms · 10 ms | |||
12 V mode | Input maximum rating | DC26.4V*3 | ||
Input voltage | DC12V approx 2.5mA*3 | |||
Minimum ON voltage | 3.0V*3 | |||
Minimum ON current | -*3 | |||
Maximum OFF voltage | 1.0V*3 | |||
Maximum OFF current | -*3 | |||
Input impedance | 4.3 kΩ*3 | |||
Insulation system | Photocoupler isolation*3 | |||
Input time constant(switching method) | · 0.2 ms · 1.5 ms · 10 ms | |||
5 V mode | Input maximum rating | DC26.4V*4 | ||
Input voltage | DC5V approx 0.9mA*4 | |||
Minimum ON voltage | 2.5V*4 | |||
Minimum ON current | -*4 | |||
Maximum OFF voltagex | 0.8V*4 | |||
Maximum OFF current | -*4 | |||
Input impedance | 4.3 kΩ*4 | |||
Insulation system | Photocoupler isolation*4 | |||
Input time constant(switching method) | · 0.2 ms · 1.5 ms · 10 ms | |||
Output specifications | transistor output | Output | Transistor output (sink type) | |
Operating load voltage range | DC10.2 to 26.4V | |||
Output unit external power supply | ||||
Rated load voltage | DC12/24V | |||
Output load current | 0.5 A/output, 5 A/unit (total)*5 | |||
Leaked current at OFF | 0.1mA or less | |||
Maximum decreased voltage at ON | 0.3 V (typ.) or less, 0.6 V (max.) or less | |||
Output response time (OFF -> ON) | 0.1ms or less | |||
Output response time (ON -> OFF) | 1.0ms or less | |||
Insulation | Photocoupler isolation | |||
relay output | Rated voltage | AC240V/DC24V | ||
Rated output current | 240 VAC, 24 VDC, 2 A/output, 4 A/common | |||
ON resistance | 50 mΩ or less | |||
ON delay time | 10ms or less | |||
Insulation | Relay isolation | |||
OFF delay time | 10ms or less | |||
Weight | approx 250g | |||
*1 Conforms to JIS B 3502 IEC61131-2 |