Programmable Logic Controller

KV-8000 series

Catalogues View Catalogue

8-point Screw Terminal Block, Relay Output with Repeater Function KL-8BLR

KL-8BLR - 8-point Screw Terminal Block, Relay Output with Repeater Function

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Software

  • CE Marking

Specifications

Model

KL-8BLR

General specifications

Disconnection error output load

30 VDC, 0.1 A or less, residual voltage: 1 V or less

Vibration resistance

10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail

Insulation system

-

Power voltage

10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable)

Operating ambient temperature

0 to 60°C

Operating ambient humidity

35 to 85%RH (no condensation)

Operating environment

No corrosive gas present

Noise immunity

Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator)

Withstand voltage

500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

Insulation resistance

-

Performance specifications

Input maximum rating

Input voltage

Minimum ON voltage

Maximum OFF current

Maximum OFF voltage

Input impedance

Number of inputs/outputs

8-terminal terminal block relay output

Internal current consumption

170mA or less

Weight

approx 160g

Output specifications

Output

-

Residual voltage (when output is ON)

Leakage current (when output is OFF)

transistor output

Rated load voltage

Rated output current

Common ground

ON delay time

OFF delay time

Insulation resistance

Insulation system

relay output

Rated voltage

AC250V/DC30V

Rated output current

2 A/output (inductive load), 4 A/output (resistive load), 4 A/all commons

Common ground

Written on the terminal wiring diagram of each unit

ON resistance

50 mΩ or less

ON delay time

10ms or less

OFF delay time

Insulation resistance

20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

Insulation system

Relay isolation

Data Sheet (PDF) Other Models