Programmable Logic Controller
KV-8000 series
High speed counter unit KV-SSC02
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | KV-SSC02*1 | |||
Type | High-speed counter unit | |||
Input frequency | 4 MHz (16 MHz during 2-phase, 4 times multiplication) | |||
Counting range | 32 bits | |||
Number of channels | 2 ch | |||
Mode | Input selection | External terminal (CH0, CH1), internal clock (0.05 µs, 1 µs, 10 µs, 100 µs), other CH coincidence output, | ||
Input mode | 1-pulse with/without direction, 2-pulse addition/subtraction operation, 2-phase 1X/2X/4X | |||
Counting operation mode | Up-down counting mode, Enable counting mode, Preset counting mode, | |||
Counting mode | Linear, ring | |||
Frequency, revolution counter operation mode | Frequency counting mode, revolution counter B mode (1-revolution time measurement) | |||
Input | Count input | A-phase/B-phase/Z-phase (preset), 3 points for each channel, 6 points in total | ||
Control input | Enable (also used for input capture) input, 1 point for each channel, 2 points in total 12 to 24 V DC input possible, photocoupler insulatio | |||
Output | Comparator coincidence output | 2 points for each channel, 4 points in total, photocoupler insulation | ||
Input capture function | By external input (max. 4 points) | |||
Buffering function | Buffering period: 1 µs or longer | |||
Input filter function | Input time constant switching (6 types of counting/9 types of control) | |||
Preset function | Possible to select from preset (Z-phase) input and internal relay-based rising edge/falling edge/level (only when an external input is used) | |||
Serial encoder communication function | Supported encoder | Absolute encoders that support EnDat2.2/22, BiSS (C-mode), and YASKAWA serial | ||
Communication cycle | EnDat2.2/22: 50 µs, BiSS (C-mode): 50 µs, YASKAWA serial: 62.5 µs | |||
Input | Equivalent to a differential line receptor that meets the EIA RS485 standard | |||
Output | Equivalent to a differential line driver that meets the EIA RS485 standard | |||
Encoder 5 V power | 5 VDC (±5 %), 300 mA or less | |||
Other functions | Unit interrupt, inter-unit synchronisation | |||
Internal current consumption | 190 mA or less | |||
Weight | Approx. 130 g | |||
*1 For KV-8000/KV-7000 Series |