Specs Programmable Logic Controller KV Nano series

Connector type: Expansion input unit

Model				KV-NC16EXE
Image
Expansion input unit	External connection method			European terminal block
	Input Points			16 points
	Input terminals			24 VDC mode, 5 VDC mode
	Maximum input voltage			26.4 VDC
	Input rated voltage	24 VDC mode		5.2 mA
		5 VDC mode		1 mA
	Minimum ON voltage	24 VDC mode		19 V
		5 VDC mode		3.5 V
	Maximum OFF voltage	24 VDC mode		1.5 mA
		5 VDC mode		1.5 V
	Common method			16 points/1 common (16 terminals) ^*1
	Input time constant (four-level switching)	Input time constant setting	OFF to ON: Typ.	25 µs: 10 µs 300 µs : 240 µs 1 ms: 1 ms 10 ms: 10 ms
			OFF to ON: Max.	25 µs: 50 µs 300 µs : 290 µs 1 ms: 1.2 ms 10 ms: 11 ms
			ON to OFF: Typ.	25 µs: 50 µs 300 µs : 280 µs 1 ms: 1 ms 10 ms: 10 ms
			ON to OFF: Max.	25 µs: 150 µs 300 µs : 390 µs 1 ms: 1.2 ms 10 ms: 11ms
	Input impedance			4.4 kΩ
Internal current consumption				20 mA or less
Weight				Approx. 120 g
^*1 The KV-NC16EXE has 16 COM terminals, but these are shared internally.

Model			KV-NC16ETE	KV-NC16ETPE
Image
Expansion output unit	External connectionmethod		MOSFET output (With overcurrent protection function)^1^2
	External connection method		European terminal block
	Rated load		30 VDC, 0.2 A^*3
	Leakage current (when output is OFF)		100 µA or less
	Residual voltage (at ON)		0.6 VDC or less
	ON resistance		―
	Common method		16 points/1 common (16 terminals)^4^5
	Response time	OFF to ON	100 µs or less (with a load of 1 mA or more)
		ON to OFF	200 µs or less (with a load of 1 mA or more)
	Relay life		―
	Relay replacement
Internal current consumption			30 mA or less
Weight			Approx. 120 g
^1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the KV-NC16ET(P) and KV-NC16ET(P)E.), until the cause of the problem is removed. ^2 Sink output types use MOSFET (N-ch) output. Source output types use MOSFET (P-ch) output. ^3 The rated load of each common terminal is 3.2. ^4 The KV-NC16ET(P), KV-NC16ET(P)E, and KV-NC32ET(P) COM terminals are shorted internally. ^*5 The outputs within the shared common that are protected when an overcurrent is detected are outputs 000to 007 or 008 to 015 for the KV-NC16ET(P) and KV-NC16ET(P)E.