3-Axis Hybrid Laser Marker

MD-X series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: 3-Axis Hybrid Laser Marker Focused spot - MD-X2050A

3-Axis Hybrid Laser Marker (Small spot type) MD-X1050

MD-X1050 - 3-Axis Hybrid Laser Marker (Small spot type)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		MD-X1050
Type		Marking unit (controller + head) 13W Focused spot
2D code reader add-in (sold separately)		MD-XAD1/MD-XAD1A
Console (sold separately)		MC-P1
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)^*1
	Wavelength	1,064 nm
	Output	13 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Guide laser/Working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)^*1
Marking area		50 x 50 x 30 mm
Standard working distance (±variable width)		100 mm (±15 mm)
Marking resolution		1 µm
Scan speed		Max. 6,000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/ GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC‐A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (marking height/width)	0.1 to 50 mm
	No. of registered programs	2,000 max.
	No. of program blocks	256
I/O (Input/output)		Terminal block I/O, MIL connector I/O, contactor control I/O^*3
Interface		RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)^*4
Head installation direction		All directions
Head cable length		4.3 ±0.1 m
Cooling method		Forced air cooling
Rated voltage and power consumption		100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C (No freezing)
	Ambient temperature	0 to +40 °C
	Relative humidity	30 to 85 % RH (No condensation)
	Ambient humidity for storage
Weight		Controller: 23.0 kg Head: 13.6 kg Console: 2.0 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^3 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C ^4 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IP™, and PROFINET.

Data Sheet (PDF) Other Models