Amplifier Unit EG-547

EG-547 - Amplifier Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		EG-547^*1
Type		AC, tolerance setting^*2
Sensitivity adjustment		10-turn potentiometer dial
Function	Operation mode	External synchronization, analog voltage switch-selectable
	External synchronization	Equipment (both without contacts and with contacts)
Output	Control output 1 (NPN)	100 mA max. (40 V max.) Residual voltage： 1 V max.^*3
	Control output 2	DPST (N.O.), 250 VAC, 0.5 A max. (resistive load)
	Disconnection alarm output(NPN)	―
	Response time (Relay contact)	1 ms
		3 ms
OFF-delay time		―
Temperature characteristics		0.08%/°C^*4
Rating	Power voltage	110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption	5 VA mAx.
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Weight		Approx. 390 g
^1 The EG-547(W) cannot be used in combination with SH-422, 430, 440, 290, 809, 816 and 822. ^2 Please contact KEYENCE for information on products that comply with the EMC directive. ^3 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter. ^4 Above values obtained when the detecting distance is set at 50% of the maximum stable detecting distance.