Specs 3D Laser Snapshot Sensor LJ-S8000 series

Controller

Model		LJ-S8000^*1
Image
Head input		Up to two LJ-S8000 Series head units * When using two units, heads A and B must be the same model.
Number of registered inspection settings		Up to 1000 settings (depending on SD card capacity and setting contents) for each of SD card 1 and SD card 2; External switching possible
Master profile / number of reference images		Up to 400 per setting (depending on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB; Equipped as standard for SD1 slot), and CA-SD16G (16 GB)
Number of tools		Up to 100 per setting
Interface	Control input	20 points (Input terminal block: 5 points, Parallel I/O: 15 points)
	Control output	• 28 points (Output terminal block: 6 points, Parallel I/O: 22 points) • Photo MOSFET^*2
	RS-232C	• Numerical value output and control I/O (When in use, PLC Link using the RS-232C port cannot be used) • Supports baud rates of up to 230400 bps
	PLC link	• Numerical value output and control I/O using Ethernet or RS-232C ports (Cannot be used with EtherNet/IP^TM; When using an RS-232C port, cannot be used with RS-232C no-procedure communication)
	Ethernet	• Numerical value output and control I/O • In addition to the functions above, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • Supports FTP client, FTP server, VNC server (for non-PC clients, only monitor screen display is supported), and BOOTP functions supported • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames
	USB	• In addition to numerical value output, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • USB 2.0 only
	EtherNet/IP^TM	• Numerical value I/O and control I/O using the Ethernet port or optional EtherNet/IP^TM unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, or EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port) / 1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version CT19.1 (Ethernet port) / CT19.1 (CB-NEP20E) conformance tests
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP^TM, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Numerical value output and control I/O using optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC Link, EtherNet/IP^TM, or PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes / Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit device identification • Complies with Version 2.5.0 conformance test
	Mouse	Various menus can be controlled using the dedicated mouse (included with the controller)
	SNTP	Automatic correction of controller date and time when connected to an SNTP server
	USB HDD	Images and other data can be output by connecting an HDD (2 TB max.) to the dedicated USB port (USB 3.0-compliant, bus-powered, rated output: 900 mA)
	Monitor output	Analogue RGB output, XGA 1024 × 768 (24-bit colour, 60 Hz)
Cooling fan		Available
Language		Switchable between English, Japanese, Chinese (Traditional/Simplified), Korean, German, French, Italian, Thai, Czech, Hungarian and Polish.
Ratings	Power voltage	24 VDC ±10%
	Maximum current consumption	Max. 2.5 A (Typ. 28 W)
Environmental resistance	Ambient temperature	0 to 45°C (DIN rail mounting) / 0 to 40°C (Base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2200 g
^1 The LJ-S8000 is marketed as the LJ-S8002 in the United States. ^2 Positive common connection for NPN input devices and negative common connection for PNP input devices supported.

Sensor head

Model			LJ-S015	LJ-S025	LJ-S040	LJ-S080	LJ-S160	LJ-S320	LJ-S640
Image
Reference distance			56.5 mm^*1	68.5 mm^*1	70 mm^*1	160 mm^*1	211 mm^*1	470.5 mm^*1	1116 mm^*1
Measurement range	Z-axis (height)		±4 mm (F.S.=8 mm)	±9 mm (F.S.=18 mm)	±18 mm (F.S.=36 mm)	±23 mm (F.S.=46 mm)	±50 mm (F.S.=100 mm)	+100/−120 mm (F.S.=220 mm)	+180/−250 mm (F.S.=430 mm)
	X-axis (width)	NEAR side	14 mm	21 mm	31 mm	66 mm	124 mm	243 mm	579 mm
		Reference distance	15 mm	23 mm	35 mm	72 mm	143 mm	295 mm	640 mm
		FAR side	16 mm	25 mm	39 mm	78 mm	160 mm	320 mm
	Y-axis	Reference distance	25 mm	51.2 mm	80 mm	160 mm
XY data interval			5 μm	8 μm	12.5 μm	25 μm	50 μm	100 μm	200 μm
Number of XY data points			3200 × 5000	3200 × 6400			3200×3200
Light source	Laser light source		405 nm (visible light) wavelength blue semiconductor laser
	Laser class		Class 2M laser product^2 (IEC 60825-1, FDA (CDRH) Part 1040.10^3)
	Output		10 mW
Repeatability	Z-axis (height)		0.3 μm^*4	0.4 μm^*4	0.5 μm^*4	1 μm^*4	3 μm^*4	5 μm^*4	10 μm^*4
	XY (distance)		0.5 μm^*5	0.7 μm^*5	1 μm^*5	3 μm^*5	5 μm^*5	10 μm^*5	25 μm^*5
Linearity	Standard area		±0.035% of F.S.^*6	±0.03% of F.S.^*6	±0.02% of F.S.^*6	±0.055% of F.S.^*6	±0.02% of F.S.^*6	±0.027% of F.S.^*6	±0.058% of F.S.^*6
	High-accuracy area		-			±0.03% of F.S.^*6	—		±0.023% of F.S.^*6
Imaging time			Min. 0.2 sec^*7				Min. 0.3 sec^*7
I/F	Ethernet		1000BASE-T, 100BASE-TX
	Input		LASER_ON, TRG, MEM_CLEAR^*8
	Output		READY, EXPOSURE_BUSY, ERROR^*8
Ratings	Power voltage		24 VDC +25%, -20%
	Current consumption / Power		Max. 4.0 A (at 19.2 V), 3.2 A (at 24 V)^*9 / Typ. 17 W				Max. 5.5 A (at 19.2 V), 4.4 A (at 24 V)^*9 / Typ. 17 W
Environmental resistance	Enclosure rating		IP65 (IEC60529)^*10
	Ambient light		Incandescent lamp: 10000 lux or less^*11
	Ambient temperature		0 to +45°C^*12
	Relative humidity		85% RH or below (no condensation)
	Vibration resistance		10 to 500 Hz; Power spectral density: 0.033 G2/Hz; X, Y, and Z directions (IEC 60068-2-64)
	Shock resistance		15 G (IEC 60068-2-27)
Material			Aluminium
Weight			Approx. 2300 g	Approx. 2100 g	Approx. 2600 g		Approx. 3600 g	Approx. 3700 g	Approx. 4300 g
^1 The reference distance is the distance from the bottom edge of the head to the measurement centre of the Z-axis (height). See the Dimensions section for the installation reference plane. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Laser classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^4 The measured target is a KEYENCE standard target. Sigma value when the average height of 200 × 200 points in the centre of the field of view is measured using the height tool with reciprocating imaging OFF. ^5 The measured target is a KEYENCE standard target. Sigma value when the distance between two circles of 500 points in diameter set 1000 points apart at the centre of the field of view on a greyscale image is measured using the circle and circle distance tool with reciprocating imaging OFF. ^6 The measured target is a KEYENCE standard target. Value when the average height of 200 × 200 points is measured using the height tool with reciprocating imaging OFF. See the Dimensions section for the high-accuracy area reference plane. ^7 With YZ range minimum and Y skipping maximum. ^8 Laser ON input is enabled only when connected to a controller. ^9 The maximum value may be exceeded when extreme acceleration is applied. ^10 With an OP cable connected. ^11 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^12 The head needs to be mounted to a metal plate to be used.