Easy configuration for any user
Easy, 3-step configuration
![[STEP1]Imaging Capture Settings / [ STEP2 ]Measurement Settings / [ STEP3 ]Output Settings](/Images/lr-z_ws_sr54328_f4_img_01_1665180.gif)
[ STEP1 ]
IMAGING CAPTURE SETTINGS — One-click optimisation for easy use by anyone —
Automatic setting optimisation function
In order to obtain a stable and clean waveform, adjusting parameters like laser power, light sensitivity, and exposure time is necessary.
By incorporating an automatic setting optimisation function, conventional adjustment operations can be done with just one click.
[ STEP2 ]
MEASUREMENT SETTINGS — 74 different measurement modes for a wide variety of inspections —
-
Measures the height within the specified range.
-
Measures the width and positions under the specified conditions.
-
Measures the angle between and the intersection point of a pair of detected straight lines.
-
Makes a comparison with the registered master shape and then measures the area with the largest difference in height.
-
Measures the height difference from a reference point to a measurement point.
-
Measures the cross sectional area from a reference surface.
-
Measures the distance between two points.
-
Measures the radius of a curved profile and the coordinates of the centre position of a specified point.
-
Measures the thickness within the specified range.
[ STEP3 ]
OUTPUT SETTINGS — Output modes available for a variety of uses —
OUTPUT METHOD
![[Measurement value]Ethernet,USB,RS-232C,Analogue voltage,EtherNet/IP(TM),PROFINET / [Profile data]Ethernet,USB,EtherNet/IP(TM),PROFINET / [OK/NG judgement]Ethernet,USB,RS-232C,I/O,EtherNet/IP(TM),PROFINET](/Images/lr-z_ws_sr54328_f4_img_15_1665194.jpg)
- High-speed 2D/3D Laser Profiler
- LJ-V7000 series
