Compact Pressure Sensor

AP-50 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Main Unit, Positive-pressure Type, 100 kPa, NPN AP-52

AP-52 - Main Unit, Positive-pressure Type, 100 kPa, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		AP-52
Type		Positive pressure, NPN
Rated pressure		0 to 1.000 bar (0 to 100.0 kPa)
Fluid type		Non-corrosive gases or liquids for stainless steel
Type of pressure		Gauge pressure
Display		4-digit, 7-segment LED (Character height: 8 mm)
Repeatability		±0.5 % max. of F.S. ±1 digit max.
Response		5 ms
Display resolution		0.001 bar, 0.01 Psi, 0.1 kPa, 0.001 kgf/cm²
Detectable pressure range		From zero adjustment position to -15 to +120 % of F.S.
I/O	Control output	100 mA max. (40 V max.), Residual voltage: 1 V max. (2 outputs) (N.O./N.C. selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	70 mA or less
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	5.0 bar (500 kPa)
	Ambient temperature	-10 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	100 m/s² (approx. 10G), 3 times in each of the X, Y, and Z directions
Material		Joint: stainless steel, Housing: PBT, die-cast zinc
Weight		Approx. 185 g (including 2-m cable)