Main Unit, Finger-protection Type, 95 Optical Axes NPN GL-VZ95FN

GL-VZ95FN - Main Unit, Finger-protection Type, 95 Optical Axes NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model			GL-VZ95FN
Beam axis spacing/Lens diameter			10 mm: ø4
Number of beam axes			95
Total length			960 mm
Detection height			940 mm
Protection height			964 mm
Minimum detectable object size			ø14 mm ^*1
Detecting distance			0.2 to 5 m ^*2
Effective angular aperture			Up to ±5° (3 m or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Response time (OSSD) (ms)	ON→OFF		23.0
	OFF→ON		73.2 ^*3
	Asynchronous→ON		85.6 ^*4
Detection mode			ON when all beam axes received
Synchronisation method			Optical synchronisation
Cable specifications	End appearance		Strand wire
	Number of cores		Transmitter: 2 cores / Receiver: 5 cores
	Length		3 m
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 3 m cable)
	OFF voltage		Up to 2.0 V (with 3 m cable)
	Leakage current		Up to 0.8 mA ^*5
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 2 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 2 AOPD) EN ISO13849-1 (Category 2, PL c) IEC61508, EN61508 (SIL1) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Power supply	Power voltage		24 VDC ±20% 10% ripple (P-P) or less, class 2
Current consumption (at maximum) (mA) Indicator : Standard / Eco	Transmitter		118 ^*6
	Receiver		67 ^*6
	Total		185 ^*6
Current consumption (at maximum) (mA) Indicator : OFF	Transmitter		73 ^*6
	Receiver		20 ^*6
	Total		93 ^*6
Environmental resistance	Enclosure rating		IP65 (IEC60529)
	Ambient light		Incandescent lamp: 3,000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55°C (no freezing) ^*7
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminium alloy
	Upper case/lower case		PBT(GF30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		640 g ^*8
	Receiver		650 g ^*8
^1 The maximum operating speed of the detected object is 2.0 m/s. ^2 When the optional front protection cover is installed, the detecting distance is reduced by 0.5 m. (The detecting distance is the same for mounting front protection cover on either side or both side of the transmitter and receiver. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “Asynchronous > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronised state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronised, the response time is long. ^5 When using NPN and the load resistance is less than 2 kΩ, the maximum current is 6 mA. ^6 The current of control output (OSSD) is not included. ^7 When the ambient operating temperature is between 50 and 55°C, set the indicator to unlit. ^8 including 3 m cable

Data Sheet (PDF) Other Models