Manual-Calibration Fibreoptic SensorFS-V/T/M series (FS01)
Display indicator (Two): Red LED
ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
NPN open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max. The FS-V1P is equipped with two outputs.
Reversed polarity protection, Overcurrent protection, Surge absorber
Up to 16 expansion units can be connected (a total of 17 units)*1
Mutual interference suppression
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less*2
50 mA or less
Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
-10 to +55 °C (No freezing)*3
35 to 85 % RH (No condensation)
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
500 m/s2, 3 times in each of the X, Y, and Z directions
Approx. 80 g
*1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.