Recent Searches
    Series ( results)
      Models ( results)
          Fully Operational with Expanded Resources
          Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
          1. Home
          2. Products
          3. Sensors
          4. Laser Sensors
          5. CMOS Multi-Function Analogue Laser Sensor
          6. Models
          7. Amplifier unit, DIN-rail mount type

          CMOS Multi-Function Analogue Laser SensorIL series

          Amplifier unit, DIN-rail mount type



          Select Language




          DIN-rail mount

          Main unit/Expansion unit

          Expansion unit

          Head compatibility



          displayable unit

          IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm

          Display range

          IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable),
          IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable)

          Display rate

          Approx. 10 times/sec.

          Analogue voltage output


          Analogue current output

          Control input

          Bank switch input

          Non-voltage input*1

          Zero-shift input

          Stop emission input

          Timing input

          Reset input

          Control output

          Judgment output

          Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*2

          Alarm output

          Open collector output (NPN, PNP changeover possible/N.C.)*2


          Power voltage

          Supplied by main unit*3

          Power consumption

          2000 mW or less (at 30 V: 67 mA or less)

          Environmental resistance

          Pollution degree


          Ambient temperature

          -10 to +50 °C (No condensation or freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions


          Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC


          Approx. 140 g (including attachments)

          *1 Assign an input of your choice to the 4 external input lines before using.
          *2 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit)
          The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit)
          *3 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE INDIA PVT. LTD. SKCL Triton Square, 1st Floor, No. C3 to C7,
          Thiru-Vi-Ka Industrial Estate, Guindy, Chennai – 600032,
          Tamil Nadu, India
          Phone: 1-800-103-0090
          Career Opportunities: KEYENCE Career Site