Recent Searches
    Series ( results)
      Models ( results)
        Keywords
          1. Home
          2. Products
          3. Sensors
          4. Positioning Sensors
          5. Laser Thrubeam Sensor
          6. Models
          7. Amplifier Unit, DIN Rail Type

          Laser Thrubeam SensorIB series

          Amplifier Unit, DIN Rail Type

          IB-1050

          SPECIFICATIONS

          Select Language

          Model

          IB-1050

          Type

          DIN rail mount

          Main unit/Expansion unit

          Expansion unit

          Head compatibility

          Yes

          Display

          Display resolution

          0.01 %, 0.1 %, 1 % (switchable)

          Display range

          –99.999 to 99.999, –99.99 to 99.99, –99.9 to 99.9, –99 to 99 (switchable)

          Digital display method

          Dual 7-segment display, Upper level: 5 red digits, Lower level: 5 green digits

          Operation indicator

          Judgment indicator: 2-colour (green/red) LED (HI, GO, LO), Bank indicator: Green LED x 4,
          Laser emission warning indicator: Green LED, Others: Green LED x 8, red LED x 3

          Analogue output voltage

          No

          Analogue current output

          Control Input

          Bank switch input, zero shift input

          Non-voltage input*1

          Control input

          Zero-shift input

          Laser emission stop input

          Timing input

          Reset input

          Adjust input

          Control output

          Judgment output (check output)

          Open collector (NPN/PNP switchable, N.O./N.C. switchable)*2

          Power supply

          Power consumption

          1,950 mW or less (at 30 V, 65 mA max.)*3

          Rating

          Power voltage

          Supplied from main unit

          Environmental resistance

          Pollution degree

          2

          Ambient temperature

          -10 to +50 °C (No condensation or freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis

          Material

          Case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC

          Weight

          Approx. 140 g

          *1 The four external input wires are assigned with desired inputs.
          Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less
          Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less
          *2 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less
          Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 2 V or less
          *3 The power consumption with slave units installed is the total of each amplifier unit's power consumption.
          Example: When using one master unit (IB-1000) with two slave units (IB-1050) (1,950 mW x 1) + (1,950 mW x 2) = 5,850 mW

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

          Sensor Library

          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE INDIA PVT. LTD. SKCL Triton Square, 1st Floor, No. C3 to C7,
          Thiru-Vi-Ka Industrial Estate, Guindy, Chennai – 600032,
          Tamil Nadu, India
          Phone: 1-800-103-0090
          E-mail: info@keyence.co.in
          Career Opportunities: KEYENCE Career Site

          Sensors