Fully Operational with Expanded Resources Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
  1. Home
  2. Products
  3. Sensors
  4. Positioning Sensors
  5. CCD Laser Micrometer
  6. Models
  7. Amplifier Unit

CCD Laser MicrometerVG series

Amplifier Unit

VG-300

[Discontinued model]

This model has been discontinued.

Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products
To contact us:

SPECIFICATIONS

Select Language

Model

VG-300

Linearity

±0.1 % of F.S. (F.S. = 30 mm)*1*2

Minimumdisplayable unit

5 µm

Repeatability

5 µm*3*4

Monitor output

Output voltage

±7 V

Impedance

100 Ω

Response time

3.9 ms (number of averaging measurements : 1)

Controloutput

Control

HI, GO, LO : NPN 100 mA, 40 V max.

Controloutput

NPN open collector : 100 mA max., (40 V max.) (one-shot output time : 1.3 ms)

Controloutput

Response time

3.9 ms (number of averaging measurements : 1)

Self-timing

NPN open collector : 100 mA max., (40 V max.) (one-shot output time : 1.3 ms)

Stability output

NPN open collector : 100 mA max., (40 V max.) (N.C.)

Response time

3.9 ms (number of averaging measurements : 1)

Digital I/O

RS-232C

Key input

10 keys

Control input

- Upper/ Lower limit select input- Auto-zero input- Auto-gain input- Reset input- Laser remote input voltage contact signals- Hold input

Temperature
fluctuation

0.005 % of F.S./°C (F.S. = 30 mm)

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

330 mA or less

Environmental resistance

Ambient temperature

0 to +50 °C

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Polycarbonate

Weight

Approx. 800 g

*1 F.S. (= 30 mm) indicates the range resulting from 2.5 mm subtraction from each end of the 35 mm measuring range.
*2 Typical data obtained when the T-to-R distance was 100 mm, the receiver-to-target distance was 50 mm and a knife edge was used to interrupt the laser beam.
*3 When the number of averaging measurements is 16
*4 This is a typical example when the distance between the transmitter and receiver has been set to 100 mm and a knife edge has been used to block light at a position that is 50 mm from the receiver. F.S. = 30 mm displays the measurement accuracy range.

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors