Lighting conversion unit (directly connected to camera) CG-LC10

CG-LC10 - Lighting conversion unit (directly connected to camera)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Software

  • CE Marking
  • CSA

Specifications

Model

CG-LC10

Lighting output

Number of channels

1

Connector

M12 A-coded 4-pin female connector

Dimming method

1. Constant voltage control method (DC lighting, with linearization function)
2. Pulse width modulation method (emission frequency 100 kHz)

Gradation

1024-level digital gradation

Voltage

12 V DC

Capacity

During 24 V DC power supply: Maximum 30 W *1
During PoE power supply: Maximum 10 W *2

Synchronization

Synchronized with trigger or shutter speed to camera/continuous lighting

Dimming response

1. Constant voltage control method: within 3 ms
2. Pulse width modulation method: within 1 ms

Control interface

Connector

Dedicated 12-pin circular connector

Power source

Supplies power via control interface

Environmental resistance

Enclosure rating

IP67(IEC 60529)

Ambient temperature

0–50°C (65°C or under for the main device)

Relative humidity

85% RH or less (no condensation)

Vibration resistance

10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)

Shock resistance

50 G in 6 directions, 3 times each (IEC 60068-2-27)

Size (H×W×D)

21 mm × 100 mm × 26 mm (excluding cable)
Total length 400 mm (including cable)

Standard certifications

CE, FCC, NRTL, KC, UKCA

Material

Main device: Polyamide

Weight

Approx. 110 g

*1 During continuous lighting: 15 W
*2 The maximum value varies depending on the power supply method of the Vision system to which the device is connected.

Data Sheet (PDF) Other Models