Recent Searches
    Series ( results)
      Models ( results)
          1. Home
          2. Products
          3. Controls
          4. PLC(Building-block/ Modular/ High Speed type)
          5. Programmable Controller
          6. Models
          7. CPU unit with built-in serial port

          Programmable ControllerKV-5000/3000 series

          CPU unit with built-in serial port



          Select Language




          CPU Unit

          Performance specifications

          Arithmetic control mode

          Stored program mode

          I/O control mode

          Refresh mode

          Program language

          Expanded ladder, mnemonic

          Number of commands

          Basic instruction: 67 classes, 122 instructions
          Applied instruction: 19 classes, 19 instructions
          Arithmetic operation instruction: 64 classes, 294 instructions
          Extended instruction: 31 classes, 48 instructions
          Total: 181 classes, 483 instructions

          Instruction execution speed

          Basic instruction: Min. 100 ns
          Applied instruction: Min. 100 ns

          Program capacity

          Approx. 16k steps (Approx. 32k steps for memory expansion)

          Maximum number of units to be installed

          16 units (48 units when expansion units are connected)

          Maximum number of I/O points

          Maximum 3,086 points for expansion (KV-EB1S/KV-EB1R: When 2 units are expanded, 64-point I/O unit is used)

          Bit device

          Input relay R

          Total 9530 points 1 bit

          Output relay R

          Internal auxiliary relay R

          Control relay CR

          640 points 1 bit

          Word device

          Timer T

          Total 512 points 32 bits

          Counter C

          Data memory DM

          20000 points 16 bits (40000 points 16 bits for memory expansion)

          Temporary data memory TM

          512 points 16 bits

          High-speed counter CTH

          2 points 32 bits

          4 points 32 bits (2 points for one high-speed counter)

          Control memory CM

          4,000 points 16 bits

          Positioning pulse output

          2 points (maximum output frequency: 100 kHz)

          CPU unit I/O

          Input: 10 points, output: 4 points

          Power failure hold function

          Program memory

          Flash ROM can be rewritten 100,000 times


          5 years (operating ambient temperature of 25°C in the power failure hold mode)*1

          Self-diagnosis function

          CPU abnormal, RAM abnormal, other

          General specifications

          Supply voltage

          24 VDC (±10 %)

          Operating ambient temperature

          0 to +50 °C (No freezing)*2*3

          Operating ambient humidity

          35 to 85 % RH (No condensation)*2

          Storage ambient temperature

          -20 to +70 °C*2

          Operating atmosphere

          No dust or corrosive gas

          Operating altitude

          2,000 m or less

          Pollution degree


          Noise immunity

          1,500 Vp-p or more, Pulse width: 1 µs, 50 ns (based on a noise simulator), IEC standard-compliant (IEC61000-4-2/3/4/6)

          Withstand voltage

          1,500 VAC for one minute (between the power terminals and the I/O terminals, and between the external terminals and the housing)

          Insulation resistor

          50 MΩ or more (measured between power terminals and I/O terminals, and between external terminals and the housing with 500 VDC megohmmeter)

          Vibration resistance

          Intermittent vibration

          Frequency 10 to 57 Hz

          Half amplitude: 0.075 mm*4

          Frequency 57 to 150 Hz

          Acceleration: 9.8 m/s2*4

          Continuous vibration

          Frequency 10 to 11 Hz

          Half amplitude: 0.035 mm*4

          Frequency 57 to 150 Hz

          Acceleration: 4.9 m/s2*4

          Impact resistance

          Acceleration 150 m/s2, Operation time 11 ms, twice in each of the X, Y and Z directions

          Overvoltage category

          II (when using KV-U7)

          Internal current consumption

          CPU unit: 160 mA or less
          Expansion unit: KV-EB1S 15 mA or less, KV-EB1R 25 mA or less (except the drive current for input loop)


          CPU unit: KV-700 approx. 240 g, Additional memory for KV-700 (OP-42138) approx. 10 g
          End unit: Approx. 30 g, Start unit for KV-1000/700: approx. 30 g
          Expansion unit: KV-EB1S approx. 90 g, KV-EB1R approx. 115 g

          *1 Target device: R/LR/CR/T/C/DM/EM/FM/CTH/CTC/CM
          *2 Guaranteed range in which the system can be used.
          *3 Specified according to the temperature in the control panel on the lower side of the unit.
          *4 JIS B 3502 Compliant with IEC61131-2, Number of scanning operations: 10 times in each of the X, Y, and Z directions (for 100 min.)

          • PLC/HMI User Support
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE INDIA PVT. LTD. SKCL Triton Square, 1st Floor, No. C3 to C7,
          Thiru-Vi-Ka Industrial Estate, Guindy, Chennai – 600032,
          Tamil Nadu, India
          Phone: 1-800-103-0090
          Career Opportunities: KEYENCE Career Site