Programmable Logic Controller
KV-X series
8 Input + 8 Relay Output Screw Terminal Block KL-8BXR
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | KL-8BXR | |||
General specifications | Disconnection error output load | 30 VDC, 0.1 A or less, residual voltage: 1 V or less | ||
Vibration resistance | 10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail | |||
Insulation system | - | |||
Power voltage | 10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable) | |||
Operating ambient temperature | 0 to 60°C | |||
Operating ambient humidity | 35 to 85%RH (no condensation) | |||
Operating environment | No corrosive gas present | |||
Noise immunity | Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator) | |||
Withstand voltage | 500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal) | |||
Insulation resistance | - | |||
Performance specifications | Input maximum rating | |||
Input voltage | ||||
Minimum ON voltage | ||||
Maximum OFF current | ||||
Maximum OFF voltage | ||||
Input impedance | ||||
Number of inputs/outputs | 8 DC inputs + 8-terminal terminal block relay output | |||
Internal current consumption | 250mA or less | |||
Weight | approx 190g | |||
Output specifications | Output | - | ||
Residual voltage (when output is ON) | ||||
Leakage current (when output is OFF) | ||||
transistor output | Rated load voltage | |||
Rated output current | ||||
Common ground | ||||
ON delay time | ||||
OFF delay time | ||||
Insulation resistance | ||||
Insulation system | ||||
relay output | Rated voltage | AC250V/DC30V | ||
Rated output current | 2 A/output (inductive load), 4 A/output (resistive load), 4 A/all commons | |||
Common ground | Written on the terminal wiring diagram of each unit | |||
ON resistance | 50 mΩ or less | |||
ON delay time | 10ms or less | |||
OFF delay time | ||||
Insulation resistance | 20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal) | |||
Insulation system | Relay isolation |