CV-X Training Videos

CV-X Training Videos

Inspection Tools

  • Auto-Teach Inspection

    Auto-Teach Inspection

    Automatically set up inspection by teaching at least 30 good parts.

  • Black-and-White Area

    Black-and-White Area

    Presence / Absence inspection counting black or white pixels by setting a binary threshold.

  • Colour Component

    Colour Component

    Check for correct colours using RGB (Red, Green, Blue) or HSB (Hue, Saturation, Brightness).

  • colour-Specific Area

    colour-Specific Area

    Presence / Absence inspection counting pixels by choosing which colours or shades are white or black.

  • Shading Pattern

    Shading Pattern

    Specify a pattern to detect presence or use to adjust the location of other required tools on a moving part.

  • PatternTrax/Outline Pattern Tool

    PatternTrax/Outline Pattern Tool

    Specify a pattern (outline) to detect presence or use to adjust the location of other required tools on a moving part.

  • Total Stain & Each Stain

    Total Stain & Each Stain

    Stable inspection used for finding defects, stains, or scratches or for detecting presence and counting.

  • Characterisation / Contrast with Background Tool

    Characterisation / Contrast with Background Tool

    Detect/count clusters of pixels that are lighter or darker than the average background.

  • Blob / Cluster Tool

    Blob / Cluster Tool

    Count, sort, or find the locations of multiple Items.

  • Edge Processing & Common Settings

    Edge Processing & Common Settings

    How an edge is detected and the settings common to all edge based tools.

  • Edge Position Tool

    Edge Position Tool

    Find the location of an edge for position reference or for use in a measurement calculation.

  • Edge to Circumference Tool

    Edge to Circumference Tool

    Find an angle by locating a radial edge along a curved surface using a ring or arc region.

  • Edge Slope / Edge Angle

    Edge Slope / Edge Angle

    Find an angle detecting an edge on two separate surfaces.

  • Edge Width Tool

    Edge Width Tool

    Detect two edges within the tool and determine the distance between them.

  • Edge Pitch Tool

    Edge Pitch Tool

    Measure the centre pitch or gap pitch across a set of edges.

  • Trend Edge Tool Overview & Common Settings

    Trend Edge Tool Overview & Common Settings

    Locate positions along the profile of surfaces in the Trend Edge tools and their common settings.

  • Trend Edge Position Tool

    Trend Edge Position Tool

    Profile a surface along a circle, arc, or ring to detect the min/max position or to specify a location.

  • Trend Edge Width Tool

    Trend Edge Width Tool

    Measure the width along an entire part or find the diameter of the part along the entire circumference.

  • Trend Edge Stain Tool

    Trend Edge Stain Tool

    Find defects along the edge of a line, circle or oval, and complex shapes and free curves.

  • 1D and 2D Code Reading Tools

    1D and 2D Code Reading Tools

    Detect 1 and 2 dimensional codes with the option to output the read text and perform judgements with the built-in calendar.

  • OCR/Characters Tool

    OCR/Characters Tool

    Extract character information in the inspection region and recognise the character string.

  • Dimensions and Geometry

    Dimensions and Geometry

    Dimensional measurement by simply choosing points, lines, or shapes.

  • Shading

    Shading

    Find average or range greyscale values to determine presence or to determine a reference for lighting intensity.

  • Position Adjustment

    Position Adjustment

    Adjust tool inspection regions to account for changing part location.

Back to top

KEYENCE INDIA PVT. LTD. SKCL Triton Square, 1st Floor, No. C3 to C7,
Thiru-Vi-Ka Industrial Estate, Guindy, Chennai – 600032,
Tamil Nadu, India
Phone: 1-800-103-0090
E-mail: info@keyence.co.in
Career Opportunities: KEYENCE Career Site